Matched supporting line — We size the mixer, feed conveyor and curing layout to the QMY4-30’s 30-second cycle, so the press never waits on material between moulds.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | QMY4-30 |
| Product Type | Mobile Concrete Block Making Machine |
| Rated Power | 5 kW |
| Cycle Time | 30 seconds |
| Overall Dimensions (L×W×H) | 1200 × 1200 × 1100 mm |
| Net Weight | 950 kg |
| Raw Materials | Cement, sand, crushed stones, slag |
| Output Capacity | 480 pcs/hour based on 400×200×200 mm hollow block (4 pcs/mould) |
| Output Capacity | 600 pcs/hour based on 400×150×200 mm hollow block (5 pcs/mould) |
| Output Capacity | 840 pcs/hour based on 400×100×200 mm hollow block (7 pcs/mould) |
| Mould Format | Hollow block, solid brick |
| Automation Level | Manual / mobile egg-laying type |
| Pallet Size | N/A (palletless egg-laying operation) |
| Voltage & Frequency | To be confirmed before commissioning |
| Control System | To be confirmed (PLC or manual control) |
| Stacking Method | Manual |
Application Suitability
| Application | Material or Output |
|---|---|
| On-site hollow block production for housing projects | Crushed stone, sand and cement mix |
| Small-scale solid brick manufacturing | Cement, sand and slag blends |
| Remote or temporary block production for contractors | Local aggregate with Portland cement |
| First block plant for entrepreneurs | Standard masonry mix designs |
Why the Mixer Feed Rate Decides Your Real Daily Output
A 30-second cycle is only honest if the mixer can deliver a fresh batch every 30 seconds.
I once watched a mobile block machine sit idle for nearly half the day because the old mixer feeding it could not keep pace. The operator waited on concrete while the curing area sat half-empty. The mobile block machine production line only reaches its rated figures when the material feed, mixing station and curing layout are all timed to the same heartbeat.
The QMY4-30 completes one mould every 30 seconds. That pace must be sustained across an entire shift without the press starving for material or the operator rushing a poorly mixed batch. [NEED_CITE: typical mixer batch sizing for mobile block machines]
Sizing the Mixing Station to the Press
A mobile concrete block making machine like the QMY4-30 demands a mixer that can turn over a batch within the 30-second window. Undersize the mixer and the press operator stands idle, watching the hopper. Oversize it and concrete begins to set before it reaches the mould. The mixing station must be matched not just in volume but in discharge speed, so material flows into the machine hopper without interruption.
Planning the Curing Area Around a Mobile Machine
Egg-laying machines drop blocks directly onto the ground, which means the curing area is the production floor. The layout must allow the machine to move forward in a straight line after each cycle while leaving enough clearance for blocks to cure without being stepped on or run over. Narrow aisles and poorly placed material piles turn a mobile block machine production line into a bottleneck where freshly pressed blocks are damaged before they harden.
Reading the Specifications That Matter on Site
The 5 kW rated power governs generator sizing — undersize the generator and the vibration motor stalls mid-cycle, producing weak blocks that crack during curing. The 1200 × 1200 mm footprint keeps the machine manoeuvrable in tight construction sites, but the surrounding material staging area needs at least double that space to avoid feed delays. The 950 kg net weight means the machine is stable during vibration yet light enough to relocate between production zones without heavy lifting equipment. Changeable moulds across hollow block and solid brick formats let one machine serve multiple product lines, provided the mould change procedure is accounted for in the daily schedule.
The Cost of Ignoring the Line Around the Press
When buyers focus only on the press and treat the mixer, feed system and curing space as afterthoughts, the consequences show up on day one. Blocks pressed from half-mixed concrete crumble at the edges. The operator wastes half a shift shuffling material by wheelbarrow because no conveyor was planned. Curing blocks left in the machine’s travel path get crushed before they gain enough strength to handle. These failures are never blamed on the press itself — they are failures of line design. [NEED_CITE: common causes of mobile block production downtime]
Why the Supporting Equipment Conversation Starts Here
Block machinery is our single focus, so the QMY4-30 is never quoted as a standalone press. Every configuration we propose includes a mixer and feed arrangement sized to the 30-second cycle, because we know from years of line planning that mismatched stations are the real reason daily output falls short. Mould drawings are confirmed against the block formats the buyer’s market actually sells before the machine enters production. Voltage, frequency and control language are locked in during the proposal stage, not discovered on arrival. Supporting equipment — raw material feeding, mixing, and curing layout — is specified as one matched system. Installation support includes operator training on the full line, not just the press controls.
Documentation & Verification
- Line layout showing mixer placement, feed path and curing zone sized to the QMY4-30 footprint
- Capacity calculation stating the block format assumed for each output figure
- Mould drawing and format list confirming hollow block and solid brick sizes before dispatch
- Voltage and frequency confirmation matched to site power or generator specification
- Factory test record on the buyer’s target block format before shipment
- Operation and maintenance manual covering both press and supporting stations
Installation, Commissioning & Support
- Flat concrete ground or compacted earth required for the QMY4-30 to move and lay blocks evenly
- 5 kW power draw confirmed against site supply or portable generator rating before startup
- Machine shipped as a single unit, ready to operate after mould mounting and power connection
- Mixer and material feed station positioned to sustain the 30-second cycle without feed gaps
- On-site operator training covers mould change, daily greasing and vibration motor inspection
- Wear parts list and mould spares provided for first replacement cycle planning
What to Share Before Requesting a Quote
Tell us the block formats your local market sells, including exact dimensions and whether you need hollow or solid types. Share your site power specification — voltage, frequency, and whether you will run on a generator — so the mobile concrete block making machine supporting equipment can be sized correctly. Let us know the condition and size of your curing area so the line layout accounts for block handling from the moment they are pressed.
Frequently Asked Questions
Q: What supporting equipment is needed to turn the QMY4-30 into a complete production setup?
A: You need a pan or drum mixer sized to deliver a fresh batch every 30 seconds, a raw material staging area with cement, sand and aggregate stockpiled near the press, and a flat curing zone large enough for a full day’s output. No pallets are required since the QMY4-30 lays blocks directly on the ground.
Q: How does the 30-second cycle time translate to realistic daily output?
A: The rated figures — such as 3840 pieces per 8-hour shift based on 400×200×200 mm hollow blocks — assume uninterrupted material feed. If the mixer batch time or manual feed falls behind, actual output drops. Plan the mixing station and material staging to match the cycle, not exceed it.
Q: What site power or generator capacity is required?
A: The QMY4-30 draws 5 kW, but the mixer and any feed conveyor add to the total load. Confirm voltage and frequency with us before dispatch so the generator or site supply is sized for the entire mobile block machine production line running simultaneously.
Q: How should the curing area be laid out around a mobile egg-laying machine?
A: The machine moves forward after each cycle, so the curing area must extend in a straight path behind it. Leave clear aisles between rows of curing blocks so workers can access them without stepping on freshly pressed units that have not yet gained handling strength.
Q: Can the supporting line be upgraded as production volume grows?
A: Yes. A manual wheelbarrow feed can be replaced by a belt conveyor to the mixer, and a larger pan mixer can reduce batch wait times. The QMY4-30 itself remains the same press — upgrading the stations around it removes bottlenecks without replacing the machine.
