Matched System Supply — the LY4-10 press, JQ350 mixer and 6-meter conveyor ship as one coordinated unit so the press is never left waiting for upstream material.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | LY4-10 |
| Product Type | Full Automatic Soil Clay Interlocking Brick Making Machine |
| Overall Dimensions (L×W×H) | 1600 × 1400 × 2100 mm |
| Total Mass | 1600 kg |
| Rated Power | 11 kW |
| Control System | PLC controlled |
| Molding Cycle | 10 s (basis not stated in source — confirm block format / material / thickness) |
| Output Capacity | 11,520 pcs/day (basis not stated in source — confirm block format / material / thickness) |
| Basic Equipment | JQ350 Concrete Mixer, 6 m Conveyor Belt |
| Raw Material Compatibility | Clay, soil, cement, construction dregs |
| Brick Height Adjustment | Adjustable via screws |
| Hydraulic System | Hydraulic pressure for brick density (pressure rating not stated in source) |
| Mould Customization | Custom moulds available to buyer drawings |
| Assembly State | On-site assembly required |
Application Suitability
| Application | Material or Output |
|---|---|
| Interlocking brick production for housing projects | Local soil blended with cement |
| On-site brick manufacturing for contractors | Excavated clay and construction dregs |
| Small-scale brick plant for distributors | Soil-clay-cement mix in interlocking format |
What the Mixer-to-Press Connection Actually Determines for Your automatic clay interlocking brick making machine production line
A press that waits for material every cycle is a press that never reaches its quoted output.
When I supported a soil brick line in West Africa, the buyer sourced a mixer from a different supplier and the discharge rate was half what the press needed. The molding cycle was rated at 10 seconds, but the real interval stretched well beyond that because the conveyor ran empty between batches. The daily count fell far short of expectation, and the buyer blamed the press. This is why the LY4-10 ships with the JQ350 mixer and 6 m conveyor included — the three stations are sized together before dispatch [NEED_CITE: importance of upstream-downstream equipment capacity matching in block production lines].
How the Three Stations Connect on the Floor
The JQ350 mixer discharges onto the 6 m conveyor belt, which carries the blended material into the LY4-10 hopper. A small control box links the mixer, conveyor and press so a single operator can run the sequence. The PLC on the press governs the molding cycle, but it cannot pull material faster than the mixer produces it — so the upstream feed rate sets the real ceiling on daily volume for any automatic clay interlocking brick making machine production line.
Where the Line Stops and the Buyer’s Scope Begins
What ships in the container is the press, mixer, conveyor and control box. Pallet feeding, wet-product stacking, curing rack handling and cubing are not part of the basic equipment package. Buyers who assume a full downstream system is included often find themselves stacking interlocking bricks by hand on day one. Clarifying which stations you must source locally before the line arrives prevents that gap [NEED_CITE: typical scope boundaries for basic versus fully automatic block plant configurations].
Reading the Numbers That Matter on This Line
The 11 kW rated power covers the press motor and hydraulic pump together. The 10-second molding cycle is measured at the press only; actual throughput depends on how quickly the JQ350 can deliver each batch and how fast the operator or downstream system clears finished bricks. Hydraulic pressure compacts the soil-cement mix to achieve interlocking brick density, though the pressure rating must be confirmed against your specific mix design and target block strength. Brick height adjustment via screws lets you switch between thicknesses without changing the entire mould, and custom moulds can be built to your interlocking profile drawings. The 1600 × 1400 × 2100 mm footprint and 1600 kg mass mean the line fits a modest workshop bay but still requires a level concrete pad rated for dynamic loading.
The Cost of Skipping the Line-Balance Check
Buyers who select a press on cycle time alone and add a random mixer later often discover the bottleneck only after commissioning. A mixer that discharges too slowly starves the press; one that discharges too fast leaves wet material sitting in the conveyor trough where it begins to set. Either mismatch shortens component life and adds cleanup labor that was never in the plan [NEED_CITE: consequences of unmatched station cycle times in concrete product lines].
Why Buyers Source This Line Through Us
Block machinery is our single focus, which means the press, mould, pallet and handling equipment are specified as one system rather than assembled from separate vendors. We set the configuration against your actual soil-clay mix and target interlocking format, not a catalogue default. Mould design covers the profiles your market sells, and custom drawings are welcome. The automation level on the LY4-10 starts at PLC-controlled single-operator running and can accommodate downstream upgrades. Installation support includes on-site assembly guidance and operator training so the line reaches stable production without extended trial-and-error.
Documentation & Verification
- Line layout showing mixer, conveyor and press positions with overall dimensions
- Capacity calculation stating which interlocking brick format the output figure assumes
- Hydraulic and electrical schematic covering press, mixer and conveyor connections
- Voltage, frequency and PLC display language confirmed before production
- Mould drawing and format list with interlocking profile options and change procedure
- Factory test record on your soil-cement mix before container loading
Installation, Commissioning & Support
- Level concrete foundation required to support the 1600 kg press mass under vibration
- Dedicated electrical circuit sized for the 11 kW total load plus startup surge
- On-site assembly of press, electric box, mixer and conveyor with guided sequence
- PLC language and voltage verified before dispatch to avoid rewiring on arrival
- Operator training on mould change, height adjustment and daily maintenance points
- Wear parts list covering hydraulic seals and mould edges with reorder references
Before You Send the Inquiry
Share the interlocking brick profile your market demands, the soil or clay type available locally, and your target daily volume. Confirm the workshop voltage and frequency, the PLC display language your operators need, and whether downstream pallet handling or stacking is already in place at your site. This information lets us return a line layout and capacity calculation tied to your actual format rather than a generic quote.
Frequently Asked Questions
Q: How is the 11,520 pieces per day figure calculated, and which interlocking brick format does it assume?
A: That figure is listed in the source material without a stated brick size, wall thickness, or mix proportion. The real daily count depends on the interlocking profile you choose, the soil-cement ratio, and whether the JQ350 mixer can sustain the feed rate. We provide a format-specific capacity calculation with every proposal so you know the exact assumption behind the number.
Q: Which downstream stations are not included in the basic LY4-10 package?
A: The basic equipment covers the press, JQ350 mixer, 6 m conveyor belt and control box. Pallet feeding, automatic stacking, curing rack handling and cubing are not included. Buyers must plan these stations separately or discuss adding them during the proposal stage so the line does not end at the press discharge.
Q: Can the JQ350 mixer keep up with the 10-second press cycle?
A: The mixer and conveyor are included because they are sized to feed the LY4-10 under typical soil-cement conditions. However, if your mix has high clay content or low moisture, batch discharge can slow. We verify the mixer-to-press balance against your specific raw material before confirming the line configuration.
Q: What voltage and PLC language options need confirming before shipment?
A: The LY4-10 is PLC-controlled, and the display language, operating voltage and frequency must match your site before the machine leaves the factory. Changing these after arrival delays commissioning and may require a new control board. We lock these details in writing during the order stage.
Q: What does the buyer need to prepare before the line arrives on site?
A: The LY4-10 requires on-site assembly of the press, electric box, mixer and conveyor. You need a level concrete foundation rated for dynamic load, a dedicated power circuit for the 11 kW system, and raw material stockpiled near the mixer position. We provide the assembly sequence and foundation drawing with the shipping documents.
